Cisco Catalyst 3550 Command Reference Manual page 337

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands

cluster enable cluster-name

Use this configuration? [yes/no]: yes

[0] Go to the IOS command prompt without saving this config.

[1] Return back to the setup without saving this config.

[2] Save this configuration to nvram and exit.

Enter your selection [2]:

Related Commands

show running-config

show version

Displays the running configuration on the switch. For syntax

information, select Cisco IOS Release 12.2 Configuration Guides and

Command References > Cisco IOS Configuration Fundamentals

Command Reference, Release 12.2 > File Management Commands

> Configuration File Management Commands.

Displays version information for the hardware and firmware.

Catalyst 3550 Multilayer Switch Command Reference

Chapters

Table of Contents