Chapter 2 Catalyst 3550 Switch Cisco Io Command; Aaa Accounting Dot1X - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

AAA accounting is disabled.

Command Modes

Global configuration

Command History

Usage Guidelines

This command requires access to a RADIUS server.

We recommend that you enter the dot1x reauthentication interface configuration command before

configuring IEEE 802.1x RADIUS accounting on an interface.

This example shows how to configure IEEE 802.1x accounting:

Switch(config)# aaa accounting dot1x default start-stop group radius

Switch(config)#

The RADIUS authentication server must be properly configured to accept and log update or watchdog

packets from the AAA client.

Related Commands

aaa authentication dot1x

dot1x re-authentication

dot1x timeout

Catalyst 3550 Multilayer Switch Command Reference

Modification

This command was introduced.

Specifies one or more AAA methods for use on interfaces running

IEEE 802.1x authentication.

Enables or disables periodic reauthentication.

reauth-period

Sets the number of seconds between re-authentication attempts.

Catalyst 3550 Switch Cisco IOS Commands

Chapters

Table of Contents