L2Protocol-Tunnel Cos - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

Catalyst 3550 Switch Cisco IOS Commands

l2protocol-tunnel cos

Use the l2protocol-tunnel cos global configuration command to configure class of service (CoS) value

for all tunneled Layer 2 protocol packets. Use the no form of this command to return to the default

Syntax Description

If a CoS value is configured for data packets for the interface, the default is to use this CoS value for

tunneled Layer 2 protocol packets. If no CoS value is configured for the interface, the default is 5.

Command Modes

Global configuration

Command History

Usage Guidelines

When enabled, the tunneled Layer 2 protocol packets use this CoS value.

The value is saved in NVRAM.

This example shows how to configure a Layer-2 protocol-tunnel CoS value of 7:

Switch(config)# l2protocol-tunnel cos 7

Related Commands

show l2protocol-tunnel

l2protocol-tunnel cos value

no l2protocol-tunnel cos

Specify CoS priority value for tunneled Layer 2 protocol packets. The range

is 0 to 7, with 7 being the highest priority.

Modification

This command was introduced.

Displays information about ports configured for Layer 2 protocol

tunneling, including CoS.

Catalyst 3550 Multilayer Switch Command Reference

l2protocol-tunnel cos

Table of Contents