Table of Contents
Advertisement
1. Lift up the shroud.
2. Unhook the latch 1.
3. Loosen the joint clamp screws 2, and then slide the
breather hose clip 3 down.
4. Disconnect the breather hose, and then remove the
air filter case.
5. Disconnect the negative battery lead.
6. Replace the blown fuse with one of proper amperage.
7. Connect the negative battery lead.
8. Install the air filter case by reversing the removal
steps.
NOTE:
@
If the fuse immediately blows again, ask a Yamaha
dealer to inspect the snowmobile.
@
Specified fuses:
4Main fuse:
5"HEAD" (Headlight) fuse:
6"SIG" (Signal) fuse:
7"C/W" (Carburetor Warmer) fuse:
8"IGN" (Ignition) fuse:
9 Spare fuses (20 A, 10 A)
0 Spare main fuse
8-37
30 A
20 A
10 A
20 A
10 A
Advertisement
Table of Contents
