Table of Contents
Advertisement
A
B
WARNING
@
This shock absorber contains highly pressurized
nitrogen gas. It could explode by improper handling,
causing injury or property damage.
G
Do not tamper with or attempt to open the shock
absorber.
G
Do not subject the shock absorber to an open
flame or other high heat source, which could
cause it to explode.
G
Do not deform or damage the shock absorber in
any way.
G
Do not dispose of a worn or damaged shock
absorber by yourself. Take the unit to a Yamaha
dealer.
@
ESU04041
Rear suspension spring preload adjustment
The rear suspension spring preload can be adjusted by
turning the spring preload adjuster 1 on the shock
absorber
(RX10/RX10R/RX10RS)
absorber (RX10M/RX10MS/RXW10/RXW10S).
For RX10/RX10R/RX10RS
CD-26E
Spring adjuster position
Preload
È Standard
NOTE:
@
The rear suspension spring preload can be further
adjusted by changing the position of the spring seat.
Have a Yamaha dealer make this adjustment as it
requires special tools.
@
For RXW10/RXW10S
CD-17E
Spring seat length*
Preload
É a Length (front)
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
8-22
or
1
2
3
Soft
Standard
Increased ←
←
Harder
Maximum
122.6 mm
112.6 mm
(4.83 in)
(4.43 in)
each
shock
4
5
6
7
Hard
4
→ Decreased
→
Softer
Minimum
112.6 mm
(4.43 in)
Advertisement
Table of Contents
