Table of Contents
Advertisement
INITIAL SETTINGS
SETTING THE RECALL INTERVAL
The machine will automatically reattempt transmission when a transmission is not successful because the line is
busy or a communication error occurs. This setting is used to select the interval between recall attempts.
• If a transmission is still not successful after the set number of recall attempts is made, a report will
Note
print and the document will be cleared from memory.
• If a communication error occurs because the memory becomes full during transmission, no recall
attempts will be made.
• Recall attempts for a direct transmission will only be made when the RSPF is used. Recall attempts
will not be made when the document glass is used.
• When the machine is waiting to make a recall attempt for a direct transmission, other operations
such as storing a transmission or selecting a function cannot be performed.
When the line is busy
You can select the interval between recall attempts when the line is busy. An interval from 1 to 15 minutes can be
selected.
1
Press the [MENU] key.
2
Press the [
] key (
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
Selection
"4:USER PROGRAM"
3
Press the [
] key (
until "10:RECALL INT. BUSY"
appears, and then press the [ENTER]
key.
Selection
"10:RECALL INT. BUSY"
4
Press the numeric keys to select the
recall interval.
34
) or [
] key (
)
) or [
] key (
)
Enter the recall interval
("01" to "15").
5
Press the [ENTER] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
Advertisement
Table of Contents
Troubleshooting
