Table of Contents
Advertisement
Menu item
6 : AUTO LISTING
7 : PRINT SELECTION
8 : RECALL TIMES BUSY
9 : RECALL TIMES ERR
10 : RECALL INT. BUSY
11 : RECALL INT. ERR
12 : SECURITY SELECT
13 : FAX REMOTE
NUMBER
14 : REMOTE RECEPTION
15 : FAX SIGNAL RCV
Settings (factory default setting appears in bold)
Enable automatic printing of the Activity Report when
information on a total of 50 fax transmissions/receptions
accumulates.
1 : ON
2 : OFF
1 : TRANSMISSION
Select the condition for printing reports on fax transmissions.
1 : ALWAYS PRINTS
2 : ERROR ONLY
3 : NEVER PRINTS
2 : BROADCAST
Select the condition for printing reports on broadcast
transmissions.
1 : ALWAYS PRINTS
2 : ERROR ONLY
3 : NEVER PRINTS
3 : RECEPTION
Select the condition for printing reports on received faxes.
1 : ALWAYS PRINTS
2 : ERROR ONLY
3 : NEVER PRINTS
4 : IMAGE MEM. PRINT
Enable printing of the original image on transaction reports.
1 : ALWAYS PRINTS
2 : ERROR ONLY
3 : NEVER PRINTS
Set the number of recall attempts that are made when the line is
busy.
0 - 9 (2)
Set the number of recall attempts that are made when a
communication error occurs.
0 - 1 (1)
Set the interval between recall attempts when the line is busy. 1
to 15 minutes can be selected.
01 - 15 min. (03 min.)
Set the interval between recall attempts when a communication
error occurs. 0 to 15 minutes can be selected.
00 - 15 min. (01 min.)
Enable the polling security function.
1 : ON
2 : OFF
Set the 1-digit number used to activate remote fax reception.
0 - 9 (5)
Enable the remote reception function.
1 : ON
2 : OFF
Enable automatic fax reception when a fax tone is heard after
answering a call on an extension phone.
1 : ON
2 : OFF
Page
88
89
89
89
89
32
33
34
35
77
40
39
38
7
Advertisement
Table of Contents
Troubleshooting
