Installing A Line Card Cable Management Bracket; Figure 1-57 Cable-Management Bracket - Cisco ASR 9000 Series Installation Manual
Aggregation services router
ethernet line card
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Chapter 1
Installing Line Cards in the Cisco ASR 9000 Series Router
Line Card Cable Management
Figure 1-57
Cable-Management Bracket
When shipped with spare line card orders, the cable-management bracket is not attached to the line card.
Note
You must attach the cable-management bracket to the line card before you insert the line card into the
router.
Do not use the cable-management bracket as a handle to pull out or push in the line card. The
Caution
cable-management bracket is designed to hold the interface cables and may break if you use the bracket
to push, pull, or carry the line card after it is removed from the router.
Installing a Line Card Cable Management Bracket
To install a line card cable-management bracket, follow these steps:
Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step 1
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
1-97
OL-17500-08
Advertisement
Table of Contents
Troubleshooting
