Installing A 10-Gigabit Ethernet Xfp Transceiver Module - Cisco ASR 9000 Series Installation Manual
Aggregation services router
ethernet line card
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Chapter 1
Installing Line Cards in the Cisco ASR 9000 Series Router
Figure 1-40
1
2
3
Installing a 10-Gigabit Ethernet XFP Transceiver Module
The XFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual
Caution
grounding device when handling XFP transceivers or coming into contact with system modules.
To install an XFP transceiver, follow these steps:
Step 1
Remove the XFP transceiver from its protective packaging.
Note
Step 2
Check the label on the XFP transceiver body to verify that you have the correct model for your network.
OL-17500-08
10-Gigabit Ethernet XFP Transceiver Module
4
5
1
2
6
Transmit optical bore
Receive optical bore
Transceiver socket connector
Do not remove the optical bore dust plug until directed to do so later in the procedure.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
Installing and Removing XFP Modules
3
4
Bale clasp (locked position)
5
Dust plug
6
Bale clasp (unlocked position)
1-79
Advertisement
Table of Contents
Troubleshooting
