Removing The 40-Gigabit Qsfp+ Transceiver Module; Figure 1-53 Cabling A 40-Gigabit Qsfp+ Transceiver Module - Cisco ASR 9000 Series Installation Manual
Aggregation services router
ethernet line card
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Chapter 1
Installing Line Cards in the Cisco ASR 9000 Series Router
The multiple-fiber push-on (MPO) connectors on the optical QSFP+ transceivers support network
Note
interface cables with either physical contact (PC) or ultra-physical contact (UPC) flat polished face
types. The MPO connectors on the optical QSFP+ transceivers do not support network interface cables
with an angle-polished contact (APC) face type.
Remove the dust plugs from the optical network interface cable MPO connectors. Save the dust plugs
Step 1
for future use.
Inspect and clean the MPO connector's fiber-optic end faces. See the Tip below for a pointer to a
Step 2
fiber-optic inspection and cleaning white paper.
Tip
Remove the dust plugs from the QSFP+ transceiver module optical bores.
Step 3
Immediately attach the network interface cable MPO connectors to the QSFP+ transceiver module. (See
Step 4
Figure
Figure 1-53
Removing the 40-Gigabit QSFP+ Transceiver Module
The QSFP+ transceiver module is a static-sensitive device. Always use an ESD wrist strap or similar
Caution
individual grounding device when handling QSFP+ transceiver modules or coming into contact with
modules.
To remove a QSFP+ transceiver, follow these steps:
For optical QSFP+ transceivers, disconnect the network interface cable from the QSFP+ transceiver
Step 1
connector.
OL-17500-08
For complete information on inspecting and cleaning fiber-optic connections, see the
Fiber-Optic Connectors" section on page 1-104.
1-53.)
Cabling a 40-Gigabit QSFP+ Transceiver Module
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
Removing the 40-Gigabit QSFP+ Transceiver Module
"Cleaning
1-93
Advertisement
Table of Contents
Troubleshooting
