Matrix - Cisco CRS-1 - Carrier Routing System Router Migration Manual
Carrier routing system
Hide thumbs
Also See for CRS-1 - Carrier Routing System Router:
- Administration manual (436 pages) ,
- Getting started manual (289 pages) ,
- Troubleshooting manual (264 pages)
Table of Contents
Advertisement
Cisco CRS-3 Carrier Routing System and CRS-1 Carrier Routing System Hardware Compatibility Matrix
b.
Now perform an install commit command and continue testing the Cisco IOS XR software release
Step 6
4.0.0.T.PX Image.
Cisco CRS-3 Carrier Routing System and CRS-1 Carrier Routing
System Hardware Compatibility Matrix
To convert the existing 40G based Cisco CRS-1 system to 140G based Cisco CRS-3 system, the MSC,
PLIM & Fabric cards would need to be replaced.
Refer to
Table 1-5
Existing
Chassis
SC : 16 slot
8 slot chassis
4 slot chassis
MC : 16 slot LCC MSC-140G
MC : 16 slot FCC
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
1-20
Install the Remove Upgrade Package: This operation removes the dummy packages of
Cisco IOS XR software release 4.0; no Cisco IOS XR software release 4.0 software is being
removed. This is only a bridging package to facilitate upgrade from Cisco IOS XR software release
pre-4.0 software to Cisco IOS XR software release 4.0 software as the package names have
changed. The upgrade package contains Cisco IOS XR software release 4.0 dummy packages
compatible with Cisco IOS XR software release pre-4.0 packages which are not typically used once
you have upgraded to Cisco IOS XR software release 4.0 software. Once your upgrade to
Cisco IOS XR software release 4.0 has completed successfully, the Cisco IOS XR software release
4.0 dummy packages (which were installed solely for compatibility with the existing
Cisco IOS XR software release pre-4.0 packages) can be removed safely.
Table 1-5 on page 1-20
140G-based Cisco CRS-3 Hardware
CRS-3 MSC
MSC-140G
FP-140G
MSC-140G
FP-140G
MSC-140G
FP-140G
FP-140G
N/A
Chapter 1
for the new 140G-based Cisco CRS-3 hardware.
CRS-3 PLIM Note
14x10GE
20x10GE
1x100GE
14x10GE
20x10GE
1x100GE
14x10GE
20x10GE
1x100GE
14x10GE
20x10GE
1x100GE
N/A
Migrating to a Cisco CRS-3 Carrier Routing System
Current CRS-1
Current CRS-1
MSC-140 must NOT be plugged
in with CRS-1 Fabric
Current CRS-1
CRS-FCC-FC140/M (S2)
[8 planes | 1 plane/board]
[8 planes | 1 plane/ 3 boards for
Multimodule config]
OL-13669-03
Advertisement
Chapters
Table of Contents
