Chapter 36 Configuring San Port Channels; Information About San Port Channels - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual
Cisco nexus 5000 series switch cli software configuration guide, nx-os 4.0(1a)n1 (ol-16597-01, january 2009)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Messages manual (518 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Configuring SAN Port Channels
SAN port channels refer to the aggregation of multiple physical interfaces into one logical interface to
provide higher aggregated bandwidth, load balancing, and link redundancy.
On Cisco Nexus 5000 Series switches, SAN port channels can include physical Fibre Channel interfaces,
but not virtual Fibre Channel interfaces. A SAN port channel can include up to eight Fibre Channel
interfaces.
This chapter discusses the SAN port channel feature provided in the switch and includes the following
sections:
•
•
•
•
•
•
Information About SAN Port Channels
A SAN port channel has the following functionality:
•
•
•
•
Cisco Nexus 5000 Series switches support a maximum of four SAN port channels (with eight interfaces
per port channel). A port channel number refers to the unique (within each switch) identifier associated
with each channel group. This number ranges from 1 to 256.
OL-16597-01
Information About SAN Port Channels, page 36-1
Configuring SAN Port Channels, page 36-4
Interfaces in a SAN Port Channel, page 36-8
Port Channel Protocol, page 36-11
Verifying SAN Port Channel Configuration, page 36-15
Default Settings, page 36-16
Provides a point-to-point connection over ISL (E ports) or EISL (TE ports). Multiple links can be
combined into a SAN port channel.
Increases the aggregate bandwidth on an ISL by distributing traffic among all functional links in the
channel.
Load balances across multiple links and maintains optimum bandwidth utilization. Load balancing
is based on the source ID, destination ID, and exchange ID (OX ID).
Provides high availability on an ISL. If one link fails, traffic previously carried on this link is switched
to the remaining links. If a link goes down in a SAN port channel, the upper layer protocol is not
aware of it. To the upper layer protocol, the link is still there, although the bandwidth is diminished.
The routing tables are not affected by link failure.
C H A P T E R
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
36
36-1
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
