Ethernet Frame Formats; Configuring Fcoe - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual
Cisco nexus 5000 series switch cli software configuration guide, nx-os 4.0(1a)n1 (ol-16597-01, january 2009)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Messages manual (518 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Configuring FCoE
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
The following rules determine whether the negotiation results in a capability being enabled:
•
•
•
•
The Cisco Nexus 5000 Series switch provides CLI commands to manually override the results of the
Note
negotiation with the adapter. On a per-interface basis, you can force capabilities to be enabled or
disabled. For additional information, see the
Ethernet Frame Formats
Ethernet frames sent by the switch to the adapter may include the IEEE 802.1Q tag. This tag includes a
field for the CoS value used by PFC. The IEEE 802.1Q tag also includes a VLAN field, currently not
used by the Cisco Nexus 5000 Series switch.
The switch will always accept tagged or untagged frames from the adapter.
If the FCoE capability is enabled between the switch and the adapter:
•
•
If the FCoE capability is disabled between the switch and the adapter:
•
•
Configuring FCoE
This section contains the following topics:
•
•
•
•
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
29-4
If a capability and its configuration values match between the switch and the adapter, the feature is
enabled.
If the capability matches, but the configuration values do not match:
If the adapter is configured to accept the switch configuration value, the capability is enabled
–
using the switch value.
–
If the adapter is not configured to accept the switch configuration value, the capability remains
disabled.
If the adapter does not support the DCBX capability, the capability remains disabled.
If the adapter does not implement DCBX, all capabilities remain disabled.
All Ethernet frames sent to the adapter include IEEE 802.1Q tags.
The VLAN ID field is always set to 0.
–
The CoS field is set to the CoS value of the associated system class. For additional information,
–
see the
"System Classes" section on page
The switch accepts tagged or untagged frames from the adapter.
Ethernet frames sent to the adapter do not include IEEE 802.1Q tags.
The switch accepts tagged or untagged frames from the adapter.
Enabling FCoE, page 29-5
Enabling FCoE on Ethernet Interfaces, page 29-5
Configuring Priority Flow Control, page 29-6
Configuring IEEE 802.3x Link-Level Flow Control, page 29-6
"Configuring FCoE" section on page
31-2.
Chapter 29
Configuring FCoE
29-4.
OL-16597-01
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
