Verifying RMON Configuration
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Configuring RMON Events
You can configure RMON events to associate with RMON alarms. You can reuse the same event with
multiple RMON alarms.
Ensure you have configured an SNMP user and enabled SNMP notifications (see the
SNMP" section on page
To configure RMON events, perform this task:
Command
Step 1
switch# configure terminal
Step 2
switch(config)# rmon event index
[description string] [log] [trap] [owner
name]
Step 3
switch(config)# show rmon {alarms |
hcalarms}
Step 4
switch(config)# copy running-config
startup-config
Verifying RMON Configuration
To display RMON configuration information, perform one of the following tasks:
Command
show rmon alarms
show rmon events
show rmon hcalarms
show rmon logs
RMON Example Configuration
This example creates a delta rising alarm on ifOutOctets and associates a notification event with this
alarm:
configure terminal
rmon alarm 1 1.3.6.1.2.1.2.2.1.17.83886080 5 delta rising-threshold 5 1 falling-threshold
0 owner test
rmon event 1 trap public
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
28-4
27-5).
Purpose
Enters configuration mode.
Configures an RMON event. The description string
and owner name can be any alphanumeric string.
(Optional) Displays information about RMON alarms
or high-capacity alarms.
(Optional) Saves this configuration change.
Purpose
Displays information about RMON alarms.
Displays information about RMON events.
Displays information about RMON hcalarms.
Displays information about RMON logs.
Chapter 28
Configuring RMON
"Configuring
OL-16597-01