Table of Contents
Advertisement
Appendix A
XECfgParm.dat File Parameters
Table A-1
Configuration Parameter
MDLANumberScreening
MML.chg-cfg
MML.snd
MML.startPM
MML.stopPM
MML.timeout
MML.vld-cic
OL-18083-14
Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
Understanding the XECfgParm.dat File Format
Definition
Invokes the standard A-number screening on the number in
the calling number parameter, regardless of whether the call
is redirected or not.
Setting the MDLANumberScreening parameter to its default
value 0 (zero) in the XECfgParm.dat file defaults all
screening actions exclusively to the original calling party
number (A-number). No screening is done on the number in
the redirecting number parameter.
Default value: 0 (zero)
Note
To invoke the redirecting number screening feature,
set the value to 1 in the XEConfigParm.dat file
during initial Cisco PGW 2200 Softswitch software
configuration.
Timeout value for the chg-cfg MML command in
milliseconds; overrides MML.timeout.
Default: 10000 milliseconds
Note
Do not change this value. This MML command is
obsolete.
Timeout value for the snd MML command in milliseconds;
overrides MML.timeout.
Default: 600000 milliseconds
Do not change this value.
Note
Timeout value for the startPM MML command in
milliseconds; overrides MML.timeout.
Default: /etc/init.d/CiscoMGC start
Note
Do not change this value.
Timeout value for the stopPM MML command in
milliseconds; overrides MML.timeout.
Default: /etc/init.d/CiscoMGC stop
Note
Do not change this value.
Timeout for MML commands, in milliseconds.
Default: 10000 milliseconds
Do not change this value.
Note
Timeout value for the vld-cic MML command in
milliseconds; overrides MML.timeout.
Default: 25000 milliseconds
Note
Do not change this value.
A-41
Advertisement
Table of Contents
