Table of Contents
Advertisement
Chapter 2
Installing the Sun Solaris 10 Operating System
Installing the Verification Test Suite Script Package (CSCOh021)
The Verification Test Suite (VTS) provides an optional script designed to test configured Sun Solaris 10
platforms used for Cisco PGW 2200 Softswitch, BAMS, and HSI products. VTS test instructions
support the following interface cards:
•
•
•
Perform all testing with a console log file enabled to capture everything entered at the console input and
displayed on the console output. One way to accomplish this is through a terminal server connected to
the console port of your platform. You can use the xterm program with the -l –lf <logfile> command line
option to create the console log file.
For each target system in the test below, you should archive the console log file along with the VTS log
file created with other records.
The VTS package is not supported by the Sun Fire X4640 and Sun Netra X4270 platforms.
Note
To install the VTS script package:
If you are using the CD-ROM, load the Cisco Solaris 10 Operating Environment CD into the CD-ROM
Step 1
drive.
Remount the cdrom by command:
# mount -F hsfs -o ro /dev/dsk/<dev_name> /cdrom
where <dev_name> is either "c0t0d0p0"(for Opteron), or "c0t0d0s0" (for Sparc), or as seen on screen
after jumpstart (see the
Step 2
Type the following command to install the VTS script package and press Enter:
# pkgadd -d /cdrom/CSCOh021.pkg
Text similar to the following is displayed:
The following packages are available:
1
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
Note
Step 3
Press Enter to select all packages. Text similar to the following is displayed:
Processing package instance <CSCOh021> from </var/tmp/CSCOh021.pkg>
Media Gateway Controller Solaris 10 test for SPARC/Opteron(sparc,i386) 3.0(6)
Cisco Systems, Inc.
OL-18083-14
Sun GigaSwift Ethernet PCI card (order number X1150A)
Sun 10/100BT Ethernet PCI card (order number X1033)
Sun Quad Fast Ethernet PCI card (order number X1034A)
"Installation of Solaris JS11 through ILOM" section on page
CSCOh021
Media Gateway Controller Solaris 10 test for SPARC/Opteron
(sparc,i386) 3.0(6)
You can also download the VTS script package (CSCOh021) from Cisco.com. For example,
download the CSCOh021 package to the /opt/SW folder on the platform and use the command,
pkgadd -d /opt/SW/CSCOh021.pkg. Make sure you downloads the platform-specific package for
your platform (Sparc-based or Opteron-based).
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
Loading the Sun Solaris 10 Operating Environment
2-21).
2-111
Advertisement
Table of Contents
