Table of Contents
Advertisement
Understanding the XECfgParm.dat File Format
Table A-1
Configuration Parameter
*.maxLocationLabels
(Added in Release 9.6(1)
*.maxNumDChansPerPort
*.maxnumRLMports
*.MgcpBehavior
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
A-16
Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Appendix A
Definition
Specifies the maximum number of location labels that can be
provisioned.
Valid value: 3000
Note
Do not change this value.
Specifies the maximum number of D-channels that can be
provisioned per IP address or port.
Valid values: Any integer (1 to 2000)
Default value: 2000
Used during provisioning to verify that the limit on the
number of unique ports for RLM links is not exceeded.
Value: 8
Default: 8
Due to Media Gateway Control Protocol (MGCP) gateway
differences in return codes, the Cisco PGW 2200 Softswitch
MGCP behavior must be configured to the appropriate value
in order to properly interface with the gateway.
Value range: Integer
0—No action.
•
–
Do not use this value for switched solutions.
–
Do not change this value for nailed solutions.
•
1—Value for non-IOS-based MGCP gateways such as
VISM.
•
2—Value for IOS-based gateways such as AS5300,
AS5400, and AS5350s.
Default: 0
XECfgParm.dat File Parameters
OL-18083-14
Advertisement
Table of Contents
