Table of Contents
Advertisement
Understanding the XECfgParm.dat File Format
Table A-1
Configuration Parameter
GWNetworkContinuity
H248.localMID
H248.maximumActionsInTransaction
H248.maxNumH248Links
H248.MgcHeaderAddrType
ioChanCtl.DPNSSTestFrames
ioChanMgr.alarmTimer
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
A-38
Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Appendix A
Definition
For network continuity test on VISM.
Valid values:
1—Network continuity is present/requested.
0—Network continuity is present/requested.
Default: 0 (Currently this property only applies to VISM
GWs.)
This property should have value = 1 when the VISM
Note
GW property is switched on.
This property is included in the H.248 message from
Cisco PGW 2200 Softswitch to gateway. It can be an IP
address in the format of X.X.X.X, or it can be a domain
name.
Values: String (up to 127 characters)
Default: 0.0.0.0
Note
The H248.MgcHeaderAddrType property contains
related information.
Sets the maximum number of actions in one H.248
Transaction.
Value: Any integer
Default: 64
Defines the maximum number of H.248 links that the
Cisco PGW 2200 Softswitch supports.
Values: Any integer
Default: 1000
Sets the Cisco PGW 2200 Softswitch H.248 local MID
address type.
Values:
1 = IP address
•
2 = Domain name
•
Default: 1
The H248.localMID property contains related information.
Enables DPNSS to generate test frames.
Values:
•
true—If DPNSS is running, test frames are generated.
•
false—Test frames are not generated.
Default: true
Do not change this value.
Note
This parameter is obsolete and should be set to 0.
XECfgParm.dat File Parameters
OL-18083-14
Advertisement
Table of Contents
