Showing Kpi Values For Wireless Links - Cisco FM1200 Installation And Configuration Manual

Hide thumbs Also See for FM1200:

Table of Contents

• The Topology view will revert to View mode.

Showing KPI values for wireless links

To show an information ribbon containing key performance indicators next

to all wireless link lines, do the steps that follow:

Click the Settings icon on the upper right part of the FM-

QUADRO view (below).

• The Appearance / Background dialog will be shown.

If the Background settings are shown, click the Appearance

heading.

Click the KPI values on routes switch from Off to On.

Click the check-boxes for each KPI you want to see for all

wireless links. Available options are:

• L.E.R. (Current link error rate, shown as a percentage)

• P.E.R. (Current packet error rate, shown as a percentage)

• RSSI (Current received signal strength, shown in dBm)

• Link Utilization (shown as a percentage)

To save your changes, click the Save changes button.

Alternatively, click the Discard button to leave the dialog without

saving any changes.

• An

performance indicators will be shown next to all wireless

link lines (a typical example is shown below).

Device configuration using the configurator interface

information

ribbon

containing

the

chosen

key

Page 85 of 175

Table of Contents

Fm1200v-hw