Show Policy-Map Interface Control-Plane - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

show policy-map interface control-plane

To display packet-level statistics for all classes that are part of the applied control plane policing (CoPP)

policy, use the show policy-map interface control-plane command.

show policy-map interface control-plane {[module module-number [inst-all]] [class {class-name| violated}]|

[class {class-name| violated}] [module module-number [inst-all]]}

Syntax Description

class class-name

module module-number

Command Modes

Any command mode

Command History

Usage Guidelines

Use this command to display the policy values with associated class maps and drops per policy or class map.

It also displays the scale factor values when a CoPP policy is applied. When the scale factor value is the default

(1.00), it is not displayed.

The scale factor changes the CIR, BC, PIR, and BE values internally on each module, but the display

shows the configured CIR, BC, PIR, and BE values only. The actual applied value on a module is the

scale factor multiplied by the configured value.

This command does not require a license.

This example shows how to monitor CoPP:

switch# show policy-map interface control-plane

Control Plane

service-policy input: copp-system-policy-default

Cisco Nexus 7000 Series Security Command Reference

Displays the packet-level statistics for the specific

Displays the packet-level statistics for the specific

module. The range is from 1 to 18.

Displays classes that have violated the police rate.

Displays per-instance statistics.

Modification

Added the inst-all keyword.

This command was introduced.

Show Commands