Xstatus Network 1 Cdp Portid; Xstatus Network 1 Cdp Duplex; Xstatus Network 1 Cdp Vtpmgmtdomain; Xstatus Network 1 Cdp Address - Cisco TelePresence SX20 Codec Reference Manual
Application programming interface (api)
Hide thumbs
Also See for TelePresence SX20 Codec:
- Reference manual (206 pages) ,
- Administrator's manual (177 pages) ,
- User manual (88 pages)
Table of Contents
Advertisement
Cisco TelePresence SX20 Codec
Contents
Introduction
xStatus Network 1 CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
xStatus Network 1 CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network
operators to diagnose connectivity problems between adjacent network elements.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
xStatus Network 1 CDP VTPMgmtDomain
Returns the switch's configured VTP management domain name-string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end
xStatus Network 1 CDP Address
Returns the first network address of both receiving and sending devices.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API
xConfiguration
xStatus Network 1 CDP PrimaryMgmtAddress
xStatus Network 1 CDP SysName
xStatus Network 1 CDP SysObjectID
176
xCommand
Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
Returns the SysName as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
- Quick Links:
- Table of Contents
- Commands
- Configurations
Hide quick links:
Advertisement
Chapters
Table of Contents
