Cisco 7960G Administrator's Manual page 162
Sip
Hide thumbs
Also See for 7960G:
- Administration manual (184 pages) ,
- User manual (122 pages) ,
- Phone manual (74 pages)
Table of Contents
Advertisement
Table D-1
Parameter
enable_vad
end_media_port
Host Name
http_proxy_addr
http_proxy_port
image_version
language
linex_authname
linex_displayname
linex_name
Cisco SIP IP Phone Administrator Guide, Release 6.x and 7.x
D-8
Configuration File Parameters (continued)
Description
(Optional) Enables voice activation detection (VAD).
Valid values are 0 (disable) and 1 (enable). Default is 0.
(Optional) Configures the Real-Time Transport Protocol (RTP) end
range for media.
Valid values are 16384 to 32766. Default is 32766.
Unique host name assigned to the phone. The value in this field is
always SIPmac where mac is the MAC address of the phone.
(Optional) IP address of the HTTP proxy server. You can use either
a dotted IP address or a DNS name.
(Optional) Number of the HTTP proxy port. Default is 80.
Firmware version that the phone should use. Enter the name of the
image version as it is released by Cisco. Do not enter the filename
extension (.bin).
Note
(Optional) This parameter is for future use. English is the only value
that is currently supported.
(Phone-specific; optional) Name used by the phone for
authentication if a registration is challenged by the proxy server
during initialization. It is required only if a proxy server requires
authentication from phones. If a value is not configured for the
linex_authname parameter when registration is enabled, the default
name is used. Default is UNPROVISIONED. The x argument can be
1 or 2.
(Phone-specific; optional) Identification as it should appear for
caller-identification purposes. For example, instead of
jdoe@company.com appearing on phones that have caller ID, you
can specify User A in this parameter to have User A appear on the
called party display. If a value is not specified for this parameter,
nothing is used.
The x argument can be 1 or 2.
(Phone-specific) Number or e-mail address for use when
registering. Enter a number without dashes. For example, enter
555-0100 as 5550100. Enter an e-mail ID without the host name.
The x argument can be 1 or 2.
Appendix D
Configurable Parameters for the SIP IP Phone
You cannot change the image version by changing the
filename because the version is also built into the file
header. Trying to change the image version by changing the
filename causes the firmware to fail when it compares the
version in the header against the filename.
Advertisement
Table of Contents
