Table of Contents
Advertisement
Reinstalling Cards in the Chassis
Step 2
Figure 3-24
Reinstalling a Clock Scheduler Card into the Switch Fabric and Alarm Card Cage
Clock scheduler card
Air filter door
Step 3
Step 4
Caution
Step 5
Cisco XR 12410 Router Installation Guide
3-32
Starting at slot CSC0:
Slide the card into the slot
d.
a.
Pivot the ejector levers to seat the card to the backplane connector.
Repeat Step 2 for each card.
Close the air filter door and tighten the captive screws to prevent the door from
opening during chassis installation.
The air filter door must be closed and secured at all times to maintain correct EMI
performance.
Go to the
"Reinstalling Cards in the Line Card and RP Card Cage" section on
page 3-33
to reinstall the line cards and RP.
Chapter 3
Installing the Cisco XR 12410 Router
(Figure
3-24).
OL-13832-01
Advertisement
Table of Contents
Troubleshooting
