Sewing Start And End Backtack Stitches - Brother S-7220B Instruction Manual

Single needle direct drive needle feed lock stitcher with thread trimmer

Hide thumbs Also See for S-7220B:

Table of Contents

5. USING THE OPERATION PANEL (BASIC OPERATIONS)

5-2. Sewing start and end backtack stitches

0841M

Setting start backtack stitches

Setting end backtack stitches

Start backtacking is carried out. After it has finished, normal sewing continues for as long as

the treadle remains depressed.

NOTE:

If the treadle is returned to the neutral position, the sewing machine will continue

operating until the set number of start backtack stitches has been sewn.

End backtacking is carried out. After it has finished, the thread is trimmed automatically and

the sewing machine stops in the needle up position.

NOTE:

• If the treadle is depressed backward before sewing of the set number of start backtack

stitches is complete, end backtacking will not be carried out.

• If the indicator of the thread trimming lock key is illuminated, the sewing machine will

stop in the needle up position without thread trimming being carried out.

S-7220B

Example:

2157M

Example:

2158M

2159M

2160M

Table of Contents

Show Quick Links

Table of Contents