Sewing; Backtacking - Brother S-7220B Instruction Manual

Single needle direct drive needle feed lock stitcher with thread trimmer

Hide thumbs Also See for S-7220B:

Table of Contents

9. SEWING

Attach all safety devices before using the sewing machine. If the machine is used without these devices attached,

injury may result.

Turn off the power switch at the following times.

The machine may operate if the treadle is depressed by mistake, which could result in injury.

When threading the needle

When replacing the bobbin and needle

When not using the machine and when leaving the machine unattended

Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in

personal injury or damage to the machine.

Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand

is used, the weight of the machine head may cause your hand to slip, and your hand may get caught.

9-1. Sewing

CAUTION

1. Carry out the programming which is necessary for sewing.

(Refer to "Using the operation panel (1)" or "Using the

control box panel (2)".)

2. Depress the treadle to start sewing.

3743M

When the actuator (1) or the reverse lever (2) is pressed

3744M

during sewing, the feed direction will be reversed. When it is

released, the feed direction will return to normal.

3745M

S-7220B

Table of Contents

Show Quick Links

Table of Contents