Applying Grease [When "Greaseup" Appears - Brother S-7220B Instruction Manual

Single needle direct drive needle feed lock stitcher with thread trimmer

Hide thumbs Also See for S-7220B:

Table of Contents

11-2. Applying grease

[When "GrEASEUP" appears...when using the operation panel]

If "GrEASEUP" flashes on the main display (1) and a buzzer sounds when the power switch is turned on, it means that grease

needs to be applied. (The sewing machine will not operate at this time, even if the treadle is depressed.)

Apply grease as required, while referring to the following for details.

1. Press the RESET key (2).

2. The main display (1) will change to stitch number display mode, and sewing will be possible when the treadle is depressed.

(The power indicator (3) will keep flashing.)

NOTE

・ If you do not apply grease when the "GrEASEUP" notification appears, the notification will continue to appear and the

power indicator (3) will flash each time the power is turned on until you reset the notification by carrying out the

procedure on the following page.

・ If you continue to use the sewing machine after the "GrEASEUP" notification appears without applying grease (or

without carrying out the reset procedure), "Err100" will appear after a certain period of time and the sewing machine will

be forcibly prevented from operating for safety reasons.

If this happens, apply grease and carry out the reset procedure.

* If you continue to use the sewing machine after carrying out the reset procedure but without applying grease,

problems with the sewing machine may result.

Use Brother-specified grease (SA7300-001).

Using the tube

S-7220B

11. CLEANING

2191M

3682M

(Continued on next page)

Table of Contents

Show Quick Links

Table of Contents