Sewing Condensed Stitches - Brother S-7220B Instruction Manual
Single needle direct drive needle feed lock stitcher with thread trimmer
Hide thumbs
Also See for S-7220B:
- Manual de instrucciones (74 pages) ,
- Instruction manual (72 pages) ,
- Basic operation manual (28 pages)
Table of Contents
Advertisement
9-3. Sewing condensed stitches
Sewing direction
Condensed stitches
3746M
3747M
Unlocked
Locked
3673M
S-7220B
If you press the actuator (1) or the reverse lever (2) while
sewing is in progress, you can sew stitches (forward
direction) with small stitch lengths.
Before carrying out sewing, set the stitch length for
condensed stitches as follows.
<Setting>
1. Lift up the dial lock lever (3) to release the lock.
2. Turn the stitch length dial (4) to the stitch length to be
used for condensed stitches.
3. Tilt back the machine head.
4. Loosen the nut (5) and then turn the bolt (6) until its head
is touching the solenoid lever (7).
5. Tighten the nut (5) to secure the bolt (6).
6. Return the machine head to its normal position.
<Sewing>
1. Return the stitch length dial (4) to the stitch length for
normal sewing.
2. Push down the dial lock lever (3) to engage the lock.
3. Start sewing.
4. At the position where you would like to start sewing
condensed stitches, press the actuator (1) or the reverse
lever (2).
(Condensed stitches are sewn while the actuator (1) or
reverse lever (2) is being pressed.)
* To stop sewing condensed stitches, tighten the bolt (6) so
that its head is not touching the solenoid lever (7).
9. SEWING
36
Hide quick links:
Advertisement
Table of Contents
