Sewing Name Labels - Brother S-7220B Instruction Manual

Single needle direct drive needle feed lock stitcher with thread trimmer

Hide thumbs Also See for S-7220B:

Table of Contents

5-5. Sewing name labels

After the fixed stitches in E and F are sewn, the presser foot is also lifted automatically.

Press the thread trimming key to turn on the thread trimming function. Thread trimming is carried out

automatically after the second set of F stitches has been sewn.

When the AUTO key is pressed to turn on the automatic sewing function, the fixed stitches in E and F

are sewn respectively simply by depressing the treadle once without needing to depress it

continuously.

• The start backtack key and end backtack key can be pressed to turn on the backtack sewing

• If changing the number of start and end backtack stitches in A, B, C and D, press the name label

0835M

After the set number of stitches in E (fixed stitches) have been sewn, the needle bar stops in

the position that has been set by the needle up/down key (refer to p.25).

After the set number of stitches in F (fixed stitches) have been sewn, the needle bar stops in

the position that has been set by the needle up/down key (refer to p.25).

Repeat steps 2 and 3 above.

Thread trimming is carried out.

function.

stitch key to turn off the name label function before making the change. (The ABCD display will

show the number of stitches and the settings can then be changed.)

5. USING THE OPERATION PANEL (BASIC OPERATIONS)

From 1 to 1999 stitches can be set for the E and F stitch numbers.

S-7220B

2162M

Example:

2159M

2160M

Table of Contents

Show Quick Links

Table of Contents