Checking Conditions Prior To System Startup - Cisco 7206VXR - VPN Bundle Router Configuration Manual
Configuration guide
Hide thumbs
Also See for 7206VXR - VPN Bundle Router:
- Installation manual (150 pages) ,
- Supplementary manual (42 pages)
Table of Contents
Advertisement
Observing System Startup and Performing a
Basic Configuration
This chapter describes how to start the system and perform a basic configuration for your Cisco 7200
VXR router. The chapter contains the following sections:
•
•
•
•
•
•
•
•
For instructions about how to perform a basic configuration for a Cisco 7206VXR as a router shelf in a
Note
Cisco AS5800 Universal Access Server, refer to the Cisco AS5800 Universal Access Server publications
that shipped with your access server.
This chapter guides you through a basic router configuration, which is sufficient for you to access your
network. Complex configuration procedures are beyond the scope of this publication and can be found
in the modular configuration and modular command reference publications in the Cisco IOS software
configuration documentation set that corresponds to the software release installed on your Cisco
hardware.
To configure a Cisco 7200 VXR router from a console, you need to connect a terminal to the router
console port. Configuration requires access to the console port on the router I/O controller.
Checking Conditions Prior to System Startup
Check the following conditions before you start your router:
•
•
OL-5013-09
Checking Conditions Prior to System Startup, page 4-1
Starting the System and Observing Initial Conditions, page 4-2
Configuring a Cisco 7200 VXR Router, page 4-3
Performing Other Configuration Tasks, page 4-15
Using show Commands to Check the Installation, page 4-16
Replacing or Recovering a Lost Password, page 4-17
Viewing Your System Configuration, page 4-20
Performing Complex Configurations, page 4-22
Each port adapter is inserted in its slot and its respective port adapter lever is in the locked position.
The network services engine (NSE) or network processing engine (NPE) and the I/O controller, or
the Port Adapter Jacket Card with and NPE-G1 and NPE-G2, are inserted in their slots and their
captive installation screws are tightened.
C H A P T E R
Cisco 7200 VXR Installation and Configuration Guide
4
4-1
Advertisement
Table of Contents
Troubleshooting
