Field-Replaceable Units
Figure 1-25
Table 1-29
LED
MII EN
RJ45 EN
RJ45 LINK
Cisco 7200 VXR Installation and Configuration Guide
1-46
C7200-I/O-FE LEDs and CPU Reset Button
C7200-I/O-FE I/O Controller LEDs
Color
Function
Green
Indicates that the Fast Ethernet MII receptacle is initialized and enabled by
the system, and is configured for operation. This LED comes on after the
I/O controller has been enabled and the MII receptacle has been configured
as the media type for the Fast Ethernet port (the RJ-45 receptacle is the
default media type for the Fast Ethernet port). This LED remains on during
normal operation of the router.
Green
Indicates that the Fast Ethernet RJ-45 receptacle (the default media type
for the Fast Ethernet port) is initialized and enabled by the system. This
LED comes on after the I/O controller has been enabled and remains on
during normal operation of the router.
Green
Indicates that the Fast Ethernet RJ-45 receptacle has established a valid
link with the network. This LED remains off during normal operation of
the router unless there is an incoming carrier signal.
Chapter 1
Cisco 7200 VXR Product Overview
OL-5013-09