Port Adapter Jacket Card - Cisco 7206VXR - VPN Bundle Router Configuration Manual
Configuration guide
Hide thumbs
Also See for 7206VXR - VPN Bundle Router:
- Installation manual (150 pages) ,
- Supplementary manual (42 pages)
Table of Contents
Advertisement
Field-Replaceable Units
Note
The port adapters installed in the Cisco 7200 VXR routers support OIR. For an explanation of OIR, see
the
All port adapters and service adapters connect to two Peripheral Component Interconnect (PCI) buses
on the router midplane. The PCI buses provide a path to packet I/O memory and the system
(route/switch) processor. The Fast Ethernet port on the I/O controller connects to a third PCI bus for
packet routing and switching. The port or service adapters either provide such services as compression
or encryption, or they provide network interfaces to connect the router to external networks.
Detailed instructions for removing, replacing, and configuring the port adapter types supported on the
Note
Cisco 7200 VXR routers are contained in the configuration note for the port adapter. For example, if you
plan to replace a 4-port Ethernet port adapter in your Cisco 7200 VXR router, refer to the configuration
note PA-4E Ethernet 10BaseT Port Adapter Installation and Configuration. The configuration note is
available on the Documentation DVD and on Cisco.com.
To ensure adequate airflow across the router's port adapters, a port adapter or a blank port adapter must
Caution
be installed in each port adapter slot.
Port Adapter Jacket Card
Figure 1-27
1
2
1
2
3
The Port Adapter Jacket Card, see
or NPE-G2 installed and with no I/O controller. The NPE-G1 has I/O controller functionality, so no I/O
controller is needed. The Port Adapter Jacket Card installs in the I/O controller slot, and provides for an
additional port adapter slot. The Port Adapter Jacket Card works from a third PCI bus, which provides
additional bandwidth and virtually unlimited bandwidth points to the single port adapter slot. For more
information, see the
Cisco 7200 VXR Installation and Configuration Guide
1-48
"Online Insertion and Removal" section on page
Port Adapter Jacket Card
4
3
Captive installation screw
ENABLE LED
PWR (power) LED
Port Adapter Jacket Card Installation
1-57.
5
4
Handle
5
Port adapter slot
Figure
1-27, is used in a Cisco 7200 VXR router only with an NPE-G1
Guide.
Chapter 1
Cisco 7200 VXR Product Overview
1
PORT ADAPTER JACKET CARD
4
OL-5013-09
Advertisement
Table of Contents
Troubleshooting
