Displaying Online Diagnostic Tests And Results - Cisco 3845 - Security Bundle Router Software Manual
Software configuration guide
Hide thumbs
Also See for 3845 - Security Bundle Router:
- Manual (94 pages) ,
- Quick start manual (38 pages) ,
- Hardware installation manual (418 pages)
Table of Contents
Advertisement
Running Online Diagnostic Tests
Command
diagnostic start test {name |
test-id | test-id-range | all | basic }
This example shows how to start a diagnostic test by using the test name:
Switch# diagnostic start test TestPortAsicRingLoopback
This example shows how to start all of the basic diagnostic tests:
Switch# diagnostic start test all
Displaying Online Diagnostic Tests and Results
You can display the configured online diagnostic tests and review the test results by using the privileged
EXEC show commands in
Table 36-2
Commands for Diagnostic Test Configuration and Results
Command
show diagnostic content
show diagnostic status
show diagnostic result [detail | test {name | test-id |
test-id-range | all [detail]}]
show diagnostic switch [detail]
show diagnostic schedule
show diagnostic post
This is an example of the output from the show diagnostic result command:
Switch# show diagnostic result
:
Overall diagnostic result: PASS
Test results: (. = Pass, F = Fail, U = Untested)
Cisco ME 3800X and 3600X Switch Software Configuration Guide
36-4
Purpose
Start the diagnostic tests.
Specify the tests by using one of these parameters:
name—Enter the name of the test. Use the show diagnostic content privileged EXEC
•
command to display the test ID list. See
•
test-id—Enter the ID number of the test. Use the show diagnostic content privileged
EXEC command to display the test ID list. See
•
test-id-range—Enter the range of test IDs by using integers separated by a comma
and a hyphen. For more information, see the diagnostic start command in the
command reference for this release.
•
all—Use this keyword when you want to run all of the tests.
basic—Use this keyword when you want to run the basic test suite.
•
Table
SerialNo : FOC1225U4CY
Table
36-2.
Purpose
Displays the online diagnostics configured for a switch.
Displays the running diagnostic tests.
Displays the specified online diagnostics test results.
Displays the online diagnostics test results.
Displays the online diagnostics test schedule.
Displays the POST results. (The output is the same as the show
post command output.)
Chapter 36
Configuring Online Diagnostics
36-1.
Table
36-1.
OL-23400-01
- Quick Links:
- Performance Features
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
