Ripv2 Provider-Edge-To-Customer-Edge Routing Sessions - Cisco 3845 - Security Bundle Router Software Manual
Software configuration guide
Hide thumbs
Also See for 3845 - Security Bundle Router:
- Manual (94 pages) ,
- Quick start manual (38 pages) ,
- Hardware installation manual (418 pages)
Table of Contents
Advertisement
Chapter 34
Configuring MPLS, MPLS VPN, MPLS OAM, and EoMPLS
Command
Step 9
show ip bgp vpnv4 vrf vrf-name
Step 10
show ip route vrf vrf-name
Use the no router bgp as-number global configuration command to delete the BGP routing session.
RIPv2 Provider-Edge-to-Customer-Edge Routing Sessions
Beginning in privileged EXEC mode, follow these steps on the provider-edge router to configure RIPv2
PE-to-CE routing:
Command
Step 1
configure terminal
Step 2
router rip
Step 3
version 2
Step 4
address-family ipv4 [unicast] vrf vrf-name
Step 5
network ip-address
Step 6
router bgp as-number
address-family ipv4 [unicast] vrf vrf-name
redistribute rip
Step 7
router rip
Step 8
version 2
Step 9
address-family ipv4 [unicast] vrf vrf-name
Step 10
redistribute bgp as-number [metric]
[transparent]
Step 11
end
Step 12
show ip rip database [network-prefix]
Step 13
show ip bgp vpnv4 vrf vrf-name
Step 14
show ip route vrf vrf-name
Step 15
copy running-config startup-config
Use the no router rip global configuration command to disable RIP routing.
OL-23400-01
Purpose
Display VPNv4 address information from the BGP table.
Display the IP routing table associated with a VRF instance.
Purpose
Enter global configuration mode.
Enable RIP routing, and enter router configuration mode.
Configure RIPv2.
Define RIP parameters for PE-to-CE routing sessions, and enter
VRF address-family configuration mode.
The default is off for auto-summary and synchronization
Note
in the VRF address-family configuration mode.
Enable RIP on the PE-to-CE link.
Redistribute per-VRF RIP routes in MBGP.
Enable RIP routing, and enter router configuration mode.
Configure RIPv2.
Define RIP parameters for PE-to-CE routing sessions, and enter
VRF address-family configuration mode.
Note
The default is off for auto-summary and synchronization
in the VRF address-family configuration mode.
Redistribute MP-IBGP VPNv4 prefixes in RIP.
Return to privileged EXEC mode.
Display summary address entries in the RIP routing database
entries.
Display VPNv4 address information from the BGP table.
Display the IP routing table associated with a VRF instance.
(Optional) Save your entries in the configuration file.
Cisco ME 3800X and 3600X Switch Software Configuration Guide
Configuring MPLS VPNs
34-13
- Quick Links:
- Performance Features
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
