Monitoring And Maintaining Cdp - Cisco HWIC-4ESW - EtherSwitch HWIC Switch User Manual
Etherswitch interface cards
Hide thumbs
Also See for HWIC-4ESW - EtherSwitch HWIC Switch:
- Supplementary manual (2 pages) ,
- User manual (118 pages)
Table of Contents
Advertisement
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Command or Action
Step 5
end
Example:
Router(config-if)# end
Step 6
show cdp interface interface-id
Example:
Router# show cdp interface
Step 7
show cdp neighbors
Example:
Router# show cdp neighbors
Monitoring and Maintaining CDP
Use the following commands to monitor and maintain CDP on your device.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
clear cdp counters
Example:
Router# clear cdp counters
Step 3
clear cdp table
Example:
Router# clear cdp table
enable
clear cdp counters
clear cdp table
show cdp
show cdp entry entry-name [protocol | version]
show cdp interface interface-id
show cdp neighbors interface-id [detail]
show cdp traffic
Purpose
Exits interface configuration mode.
Verifies the CDP configuration on the interface.
Verifies the information about the neighboring equipment.
Purpose
Enables privileged EXEC mode.
•
Enter your password if prompted.
(Optional) Resets the traffic counters to zero.
(Optional) Deletes the CDP table of information about
neighbors.
How to Configure EtherSwitch HWICs
43
Advertisement
Chapters
Table of Contents
