Cisco HWIC-4ESW - EtherSwitch HWIC Switch User Manual page 11
Etherswitch interface cards
Hide thumbs
Also See for HWIC-4ESW - EtherSwitch HWIC Switch:
- Supplementary manual (2 pages) ,
- User manual (118 pages)
Table of Contents
Advertisement
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
vlan database
Example:
Router# vlan database
Step 3
vtp transparent
Example:
Router(vlan)# vtp transparent
Step 4
exit
Example:
Router(vlan)# exit
Configuring Layer 2 Interfaces
This section provides the following configuration information:
•
•
•
Configuring a Range of Interfaces
Use the following task to configure a range of interfaces.
SUMMARY STEPS
1.
2.
3.
Configuring a Range of Interfaces, page 10
Defining a Range Macro, page 11
Configuring Layer 2 Optional Interface Features, page 12
enable
configure terminal
interface range {macro macro-name | fastethernet interface-id [ - interface-id] | vlan vlan-id} [,
fastethernet interface-id [ - interface-id] | vlan vlan-id]
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters VLAN configuration mode.
Configures VTP transparent mode.
Updates the VLAN database, propagates it throughout the
administrative domain, exits VLAN configuration mode, and
returns to privileged EXEC mode.
(required)
(optional)
(optional)
How to Configure EtherSwitch HWICs
11
Advertisement
Chapters
Table of Contents
