Cisco HWIC-4ESW - EtherSwitch HWIC Switch User Manual page 39
Etherswitch interface cards
Hide thumbs
Also See for HWIC-4ESW - EtherSwitch HWIC Switch:
- Supplementary manual (2 pages) ,
- User manual (118 pages)
Table of Contents
Advertisement
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Command or Action
Step 3
mac-address-table secure mac-address
fastethernet interface-id [vlan vlan-id]]
Example:
Router(config)# mac-address-table secure
0000.0002.0001 fastethernet 0/1/1 vlan 2
Step 4
end
Example:
Router(config)# end
Step 5
show mac-address-table secure
Example:
Router# show mac-address-table secure
Creating a Static Entry in the MAC Address Table
Follow these steps to create a static entry in the MAC address table.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
Router(config)# mac-address-table static
mac-address fastethernet interface-id [vlan
vlan-id]
Example:
Router(config)# mac-address-table static
00ff.ff0d.2dc0 fastethernet 0/1/1
enable
configure terminal
mac-address-table static mac-address fastethernet interface-id [vlan vlan-id]
end
show mac-address-table
Purpose
Secures the MAC address traffic on the port.
•
Enter the MAC address, the fastethernet keyword, the
interface number and any optional keywords and
arguments as desired.
Returns to privileged EXEC mode.
Verifies the configuration.
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Creates a static entry in the MAC address table.
When the vlan-id is not specified, VLAN 1 is taken by
•
default.
How to Configure EtherSwitch HWICs
39
Advertisement
Chapters
Table of Contents
