Cisco HWIC-4ESW - EtherSwitch HWIC Switch User Manual page 10
Etherswitch interface cards
Hide thumbs
Also See for HWIC-4ESW - EtherSwitch HWIC Switch:
- Supplementary manual (2 pages) ,
- User manual (118 pages)
Table of Contents
Advertisement
How to Configure EtherSwitch HWICs
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
vlan database
Example:
Router# vlan database
Step 3
vtp client
Example:
Router(vlan)# vtp client
Step 4
exit
Example:
Router(vlan)# exit
Disabling VTP (VTP Transparent Mode)
When you configure the switch as VTP transparent, you disable VTP on the switch. A VTP transparent
switch does not send VTP updates and does not act on VTP updates received from other switches.
Follow the steps below to disable VTP on the switch.
SUMMARY STEPS
1.
2.
3.
4.
10
enable
vlan database
vtp client
exit
enable
vlan database
vtp transparent
exit
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Purpose
Enables privileged EXEC mode.
•
Enter your password if prompted.
Enters VLAN configuration mode.
Configures the switch as a VTP client.
Updates the VLAN database, propagates it throughout the
administrative domain, exits VLAN configuration mode and
returns to privileged EXEC mode.
Advertisement
Chapters
Table of Contents
