Configuring A Multicast Router Port - Cisco HWIC-4ESW - EtherSwitch HWIC Switch User Manual
Etherswitch interface cards
Hide thumbs
Also See for HWIC-4ESW - EtherSwitch HWIC Switch:
- Supplementary manual (2 pages) ,
- User manual (118 pages)
Table of Contents
Advertisement
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Configuring a Multicast Router Port
Follow the steps below to enable a static connection to a multicast router.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
ip igmp snooping vlan vlan-id mrouter
{interface interface-id | learn pim-dvmrp}
Example:
Router(config)# ip igmp snooping vlan1
interface Fa0/1/1 learn pim-dvmrp
Step 4
end
Example:
Router(config)# end
Step 5
show ip igmp snooping
Example:
Router# show ip igmp snooping
enable
configure terminal
ip igmp snooping vlan vlan-id mrouter {interface interface-id | learn pim-dvmrp}
end
show ip igmp snooping
show ip igmp snooping mrouter [vlan vlan-id]
copy running-config startup-config
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enables IGMP snooping on the VLAN interface and enables
route discovery.
Returns to privileged EXEC mode.
(Optional) Displays snooping configuration.
How to Configure EtherSwitch HWICs
55
Advertisement
Chapters
Table of Contents
