Getting Started with the WRVS4400N Router
Placement Options
STEP 3
STEP 1
STEP 2
STEP 3
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Repeat step 2 with the other stand.
Wall Option
To mount the Cisco WRVS4400N router on the wall, follow these steps.
Determine where you want to mount the router and install two screws (not
supplied) that are 2-9/16 in. apart (approximately 64.5 mm).
With the back panel pointing up (if installing vertically), line up the router so that the
wall-mount crisscross slots on the bottom of the access point line up with the two
screws.
2-9/16
Wall
mount
slots
Place the wall-mount slots over the screws and slide the router down until the
screws fit snugly into the wall-mount slots.
4
31