Configuring Vpn Passthrough - Cisco QuickVPN - PC Administration Manual
Wireless-n gigabit security router with vpn
Hide thumbs
Also See for QuickVPN - PC:
- Administration manual (244 pages) ,
- User manual (112 pages) ,
- Administration manual (200 pages)
Table of Contents
Advertisement
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the VPN Settings
STEP 1
STEP 2
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Configuring VPN Passthrough
The VPN > VPN Passthrough window displays the settings needed to allow users
to have the router pass through the traffic, using their own VPN algorithms to
connect to their remote routers.
To configure VPN Passthrough settings for the router, follow these steps:
Click VPN > VPN Passthrough.
Configure VPN Passthrough settings.
•
IPsec Passthrough—Internet Protocol Security (IPsec) is a suite of
protocols used to implement secure exchange of packets at the IP layer.
IPsec Passthrough is enabled by default to allow IPsec tunnels to pass
through the router. To disable IPsec Passthrough, select Disabled.
•
PPTP Passthrough—Point-to-Point Tunneling Protocol (PPTP) allows the
Point-to-Point Protocol (PPP) to be tunneled through an IP network. PPTP
Passthrough is enabled by default. To disable PPTP Passthrough, select
Disabled.
5
125
Advertisement
Table of Contents
