Running The Vpn Router Software Wizard - Cisco QuickVPN - PC Administration Manual
Wireless-n gigabit security router with vpn
Hide thumbs
Also See for QuickVPN - PC:
- Administration manual (244 pages) ,
- User manual (112 pages) ,
- Administration manual (107 pages)
Table of Contents
Advertisement
Using the VPN Setup Wizard
Running the VPN Router Software Wizard
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Running the VPN Router Software Wizard
STEP 1
STEP 2
STEP 3
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Click Firewall > Basic Settings.
Enable Remote Management and enter 8080 in the Port field. Please note that you
cannot enter any other value if you want to use the VPN Wizard. Also, make sure
that HTTPS has been selected.
Click Save Settings.
Click VPN > Summary and make sure the Tunnel(s) available are not zero.
Ensure that the LAN IP addresses of routers with VPN are in different subnets in
order for the VPN connection to work.
The VPN Setup Wizard assumes that no firewall/NAT device sits in front of
NOTE
the VPN router.
Access the VPN Setup Wizard in one of two ways:
•
If you have an RVS4000, WRVS4400N v1. 1 , or WRVS4400N v2 Installation
CD-ROM, insert it into your CD-ROM drive.
•
Download the VPN Setup Wizard from the Cisco Support site for your
router.
Go to the Start menu and click Run. In the field provided, enter
D:\VPN Setup Wizard.exe
The Welcome window appears. Click the Click Here to Start button.
6
169
Advertisement
Table of Contents
