Cisco QuickVPN - PC Administration Manual page 49
Wireless-n gigabit security router with vpn
Hide thumbs
Also See for QuickVPN - PC:
- Administration manual (244 pages) ,
- User manual (112 pages) ,
- Administration manual (107 pages)
Table of Contents
Advertisement
Setting Up and Configuring the WRVS4400N Wireless-N Router
Setting Up Your Wireless-N Router
STEP 5
STEP 6
STEP 7
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
If required by your ISP, configure the following settings:
•
Host Name—Enter the host-name provided by your ISP if you have
broadband/cable Internet service and your ISP requires you to use a host-
name as network identification. In most cases you can leave this field blank.
•
Domain Name—Enter the domain name provided by your ISP if you have
broadband/cable Internet service and your ISP requires you to use a domain
name as network identification. In most cases you can leave this field blank.
•
MTU—MTU is the Maximum Transmission Unit. It specifies the largest
packet size permitted for Internet transmission. Select Manual if you want to
manually enter the largest packet size to be transmitted. To have the router
select the best MTU for your Internet connection, keep the default setting,
Auto.
•
Size—If you select Manual in the MTU field, this option is enabled. The
recommended setting for this field is 1500 (standard MTU size on Ethernet
media).
To configure the DDNS service, see
page
58.
Click Save.
"Configuring DDNS Service Settings" on
5
49
Advertisement
Table of Contents
