Table of Contents
Advertisement
SETTING THE NUMBER OF RINGS FOR MANUAL RECEPTION
The number of rings before the machine answers in MANUAL mode can also be set.
If you do not want the machine to answer at all in MANUAL Mode, select "0" in Step 4 below.
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [
] key (
until "4:USER PROGRAM" appears,
and then press the [OK] key.
Selection
"4:USER PROGRAM"
3
Press the [
] key (
until "5:# OF RINGS (MANUAL)"
appears, and then press the [OK] key.
Selection
"5:# OF RINGS (MANUAL)"
SELECTING THE RECEPTION PAPER SIZE
Set the size of paper to be used to print received faxes. A size setting other than "A4", "8.5x11", or "8.5x14" is
regarded as out of paper. To set the paper size, see "LOADING PAPER" in the Operation Manual (for general
information).
) or [
] key (
)
) or [
] key (
)
4
Press a numeric key to select the
number of rings.
5
Press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC
6
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
INITIAL SETTINGS
Select the number of
rings you would like to
use (0 to 9).
Press the [MENU] key to
exit.
29
2
Advertisement
Table of Contents
Troubleshooting
