Table of Contents
Advertisement
POLLING
Polling allows you to request another fax machine to send an original to your fax machine. In other words, the
receiving fax machine, not the transmitting fax machine, activates the transmission. You can use your fax to both
poll and be polled by others.
Serial polling can be used to poll multiple fax machines (maximum of 100) in a single operation.
POLLING
You can request that another fax machine send you the original that is set in that fax machine. You can perform a
polling operation at a scheduled time. (See "TIMER OPERATIONS" (p.78))
Polling fax
Other fax memory
Original is set
Follow these steps to use the polling function:
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [
] key (
until "8:POLLING MODE" appears,
and then press the [OK] key.
Selection
"8:POLLING MODE"
72
Original is scanned
into memory
) or [
] key (
)
Select polling
polling
Polling is approved
3
Dial the number of the fax machine
you want to poll using one of the
following methods:
• Press a Rapid Key.
If you press a Rapid Key, the next step is not
necessary.
• Press the [SPEED/SEARCH] key and enter a
two-digit Speed Dial number.
• Enter the fax number with the numeric keys.
A group key can be pressed to perform
Note
serial polling. Fax reception will take place in
the order that the destinations are stored in
the Group Key.
4
Press the [START] key (
beep
Fax received
sending
).
Advertisement
Table of Contents
Troubleshooting
