Table of Contents
Advertisement
Chapter 3
Installing Cisco uBR7100 Series Universal Broadband Routers
Physical Placement
Mounting the Chassis on a Tabletop
The Cisco uBR7100 series router can be mounted on a flat, hard, and stable surface, such as a tabletop.
Ensure that the mounting area has a sufficient footprint to accommodate the router, as given in the
"Site
Requirement Guidelines" section on page
2-6.
Equipment not located correctly on a tabletop is susceptible to malfunctions and shutdowns, and can
make maintenance difficult. Make sure that the equipment is not placed too close together, that the
equipment has adequate ventilation, and that all panels are easily accessible.
Before placing the router on the tabletop, attach the rubber feet as shown in
Figure
3-1. Rubber feet are
included in the accessory kit that shipped with your router.
Figure 3-1
Attaching the Rubber Feet
Cisco uBR7100 series router
chassis bottom
Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury
Warning
and equipment damage. Statement 48
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
3-2
OL-5916-01
Advertisement
Table of Contents
Troubleshooting
