Table of Contents
Advertisement
Attaching the System Ground Connection
Insert the two screws through the holes in the grounding lug. (See
Step 4
lug does not interfere with other router hardware.
Figure 3-6
Screws
Grounding lug
Locate the chassis grounding receptacles that are on either side on your router chassis. Choose the side
Step 5
that is most convenient for attaching the grounding wire. (See
Figure 3-7
0
2
Use the flat-blade screwdriver to carefully tighten the screws until the grounding lug is held firmly to
Step 6
the chassis. Do not overtighten the screws.
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
3-6
Attaching the Ground Wire to the Grounding Lug
Chassis
grounding
receptacles
Wire
Attaching the Grounding Lug to the Telcordia Bonding Grounding Receptacles
Chassis grounding receptacles
Chapter 3
Installing Cisco uBR7100 Series Universal Broadband Routers
Figure
Grounding lug
Grounding wire
Figure
3-6.) Ensure that the grounding
3-7.)
Screws
OL-5916-01
Advertisement
Table of Contents
Troubleshooting
