Cowling Lock Lever (Pull Up Type); Flushing Device; Fuel Filter/Water Separator - Yamaha F75 Owner's Manual
Hide thumbs
Also See for F75:
- Owner's manual (104 pages) ,
- Installation manual (224 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
Available languages
Available languages
Components
1. Tilt support lever
ECM00661
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to secure
it in the tilt position.
EMU26385
Cowling lock lever (pull up type)
To remove the engine top cowling, pull up the
cowling lock lever(s) and lift off the cowling.
When installing the cowling, check to be sure
it fits properly in the rubber seal. Then lock
the cowling by moving the cowling lock le-
ver(s) downward.
1. Cowling lock lever(s)
32
1. Cowling lock lever(s)
EMU26464
Flushing device
This device is used to clean the cooling water
passages of the motor using a garden hose
and tap water.
1. Flushing device
TIP:
For details on usage, see page 74.
EMU33467
Fuel filter/Water separator
1
This engine has a combination fuel filter/wa-
ter separator and associated alert system. If
water separated from the fuel exceeds a spe-
cific volume, the alert device of 6Y8 Multi-
function Tachometer will activate.
ZMU05347
1
ZMU05348
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Chapters
Table of Contents
