Engine; Flushing Device; Install Cowling - Yamaha F75 Owner's Manual
Hide thumbs
Also See for F75:
- Owner's manual (104 pages) ,
- Installation manual (224 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
Available languages
Available languages
Operation
EMU27154
Engine
Check the engine and engine mounting.
Look for loose or damaged fasteners.
Check the propeller for damage.
Check for engine oil leaks.
EMU36494
Flushing device
Check that the flushing device's garden hose
connector is securely screwed on to the fit-
ting on the bottom cowling. NOTICE: If the
garden hose connector is not properly
connected, cooling water can leak out and
the engine can overheat during operation.
[ECM01802]
1
1. Fitting
2. Flushing device
EMU36965
Install cowling
1.
Be sure that all cowling lock levers are
released.
2.
Be sure that the rubber seal is seated all
the way around the top cowling.
3.
Place the top cowling on the bottom
cowling.
4.
Check to be sure the rubber seal is seat-
ed correctly between the top cowling
and the bottom cowling.
5.
Move the cowling lock levers to lock the
top cowling as shown. NOTICE: If the
top cowling is not installed correctly,
52
2
ZMU06166
water spray under the top cowling can
damage the engine, or the top cowling
can blow off at high speeds.
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
[ECM01992]
ZMU06131
ZMU06132
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Chapters
Table of Contents
