Removing Propeller; Installing Propeller - Yamaha F75 Owner's Manual
Hide thumbs
Also See for F75:
- Owner's manual (104 pages) ,
- Installation manual (224 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
Available languages
Available languages
Maintenance
Check each of the propeller blades for ero-
sion from cavitation or ventilation, or other
damage.
Check the propeller shaft for damage.
Check the splines for wear or damage.
Check for fish line tangled around the pro-
peller shaft.
Check the propeller shaft oil seal for dam-
age.
EMU30663
Removing propeller
EMU29198
Spline models
1.
Straighten the cotter pin and pull it out
using a pair of pliers.
2.
Remove the propeller nut, washer, and
spacer (if equipped). WARNING! Do not
use your hand to hold the propeller
when loosening the propeller nut.
[EWM01891]
1. Cotter pin
2. Propeller nut
3. Washer
84
1
4 3
5
6
ZMU08177
4. Spacer
5. Propeller
6. Thrust washer
3.
Remove
equipped), and thrust washer.
EMU30673
Installing propeller
EMU29236
Spline models
ECM00502
NOTICE
Make sure to use a new cotter pin and
bend the ends over securely. Otherwise,
the propeller could come off during oper-
ation and be lost.
1.
Apply Yamaha marine grease or a corro-
sion resistant grease to the propeller
shaft.
2.
Install the spacer (if equipped), thrust
washer, washer (if equipped), and pro-
peller on the propeller shaft. NOTICE:
Make sure to install the thrust washer
before installing the propeller. Other-
wise, the lower case and propeller
boss could be damaged.
3.
Install the spacer (if equipped) and the
washer. Tighten the propeller nut to the
specified torque.
2
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
the
propeller,
washer
[ECM01882]
4 3
5
6
(if
1
2
ZMU08175
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Chapters
Table of Contents
