1. Tilt support lever
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard mo-
tor could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the tilt
position.
EMU26382
Top cowling lock lever (pull up type)
To remove the engine top cowling, pull up the
lock lever(s) and lift off the cowling. When in-
stalling the cowling, check to be sure it fits
properly in the rubber seal. Then lock the
cowling by moving the lever(s) downward.
1. Top cowling lock lever(s)
1. Top cowling lock lever(s)
EMU26460
Flushing device
This device is used to clean the cooling water
passages of the motor using a garden hose
and tap water.
TIP:
For details on usage, see page 66.
1. Flushing device
EMU33462
1
Fuel filter/Water separator
This engine has a combination fuel filter/water
separator and associated alert system. If wa-
ter separated from the fuel exceeds a specific
volume, the alert device of Command Link Ta-
chometer will activate.
ZMU05347
Components
1
ZMU005348
29